Pikachu (Pelipper Costume) (Pokemon)

Pikachu is a short, chubby rodent Pokémon. It is covered in yellow fur with two horizontal brown stripes on its back. It has a small mouth, long, pointed ears with black tips, brown eyes, and two red circles on its cheeks. There are pouches inside its cheeks where it stores electricity. It has short forearms with five fingers on each paw, and its feet each have three toes. At the base of its lightning bolt-shaped tail is patch of brown fur at the base. A female will have a V-shaped notch at the end of its tail, which looks like the top of a heart. It is classified as a quadruped, but it has been known to stand and walk on its hind legs.

About the Model:

Height: 27.2cm

Width: 17.4cm

Depth: 22.3cm

Number of Pages: 11

Number of Parts: 64

DOWNLOAD  A4 ONLY

Build Order: The same as my Charizard Costume Pikachu, just without wings and a tail.

Notes: Pdo files are included. The Pelipper modification was made by Samos Legacy, the picture is by Yasawa Shiro. Also keep an eye out for a new costumed Pikachu coming out by darkrash! (I will also be releasing some relatively soon)

Charmander (Charizard Costume) (Pokemon)

Charmander is a bipedal, reptilian Pokémon with a primarily orange body. Its underside from the chest down and soles are cream-colored. It has two small fangs visible in its upper jaw and two smaller fangs in its lower jaw. Charmander has blue eyes. Its arms and legs are short with four fingers and three clawed toes. A fire burns at the tip of this Pokémon's slender tail, and has blazed there since Charmander's birth. The flame can be used as an indication of Charmander's health and mood, burning brightly when the Pokémon is strong, weakly when it is exhausted, wavering when it is happy, and blazing when it is enraged. It is said that Charmander dies if its flame goes out. However, if the Pokémon is healthy, the flame will continue to burn if gets a bit wet and is said to steam in the rain. Charmander can be found in hot, mountainous areas. However, it is found far more often in the ownership of Trainers. As shown in Pokémon Snap, Charmander exhibits pack behavior, calling others of its species if it finds food.

About the Model:

Height: 14cm / 49.9cm

Width: 14.3cm / 51cm

Depth: 11.4cm / 40.8cm

Number of Pages: 3 / 27

Number of Parts: 70 / 82

DOWNLOAD  14CM / DOWNLOAD 50CM

Build Order: Follow the video :D

Notes: Charmander was built by Saibros. Thanks for building!

Two textureless .pdo files are included in the package! Pdo file for use in Pepakura VIEWER only. An Edge ID pdf file is included as well.

Eevee (Life-Size) (Pokemon)

Eevee is a mammalian, quadruped creature with primarily brown fur. The tip of its bushy tail and its large furry collar are cream-colored. It has short, slender legs with three small toes and a pink paw pad on each foot. Eevee has brown eyes, long pointed ears, and a small black nose. This Pokémon is rarely found in the wild, and is mostly only found in cities and towns. However, Eevee is said to have an irregularly shaped genetic structure that allows it to adapt to many different kinds of environments. Eventually, Eevee may evolve to better suit its surroundings. According to Pokémon Mystery Dungeon, Eevee has a naive personality.

About the Model:

Height: 30.5cm

Width: 31.9cm

Depth: 35.6cm

Number of Pages: 11

Number of Parts: 102

DOWNLOAD  A4 ONLY

Build Order: Hair, ears, head, fur, front legs, body, hind legs, tail.

Notes: Eevee was built by Giden445. Thanks for building!

Pdo files (without textures) are included. An Edge ID pdf file is included as well.

More poses for Eevee, and more crafts coming really soon, so be sure to check back!

Mystery Dungeon Squirtle

Squirtle is a small Pokémon that resembles a light blue turtle. While it typically walks on its two short legs, it has been shown to run on all fours in Super Smash Bros. Brawl. It has large eyes and a slightly hooked upper lip. Each of its hands and feet have three pointed digits. The end of its long tail curls inward. Its body is encased by a tough shell that forms and hardens after birth. This shell is brown on the top, pale yellow on the bottom, and has a thick white ridge between the two halves. Squirtle's shell is a useful tool. It can withdraw into the shell for protection or for sleeping, and its grooved, rounded shape helps to reduce water resistance when this Pokémon swims. Squirtle can spray foamy water from its mouth with great accuracy. In the past, Skull Bash was its signature move. Squirtle is scarce in the wild, although it can be found around small ponds and lakes. The anime has shown that it can be found living on secluded islands with other members of its evolutionary line.

About the Model:
Height: 15cm
Width: 10.4cm
Depth: 16.2cm
Number of Pages: 4
Number of Parts: 45
DOWNLOAD  A4 ONLY

Build Order: Just follow the video :D

Notes: Squirtle was built by SuperRetroBro. Thanks for building!
Two textureless .pdo files are included in the package! Pdo file for use in Pepakura VIEWER only. An Edge ID pdf file is included as well.

Birthday Special - Charizard (Pokemon)

Charizard is a draconic, bipedal Pokémon. It is primarily orange with a cream underside from the chest to the tip of its tail, which burns with a sizable flame. Charizard has a long neck, small blue eyes, raised nostrils, and two blunt horns protruding from the back of its rectangular head. There are two fangs visible in the upper jaw when its mouth is closed. Two large wings with teal undersides sprout from its back, and a horn-like appendage juts out from the third joint of each wing. Charizard's arms are short and skinny compared to its robust belly, and each limb has three white claws. It has stocky legs and cream-colored soles under its feet.

About the Model:
Height: 30cm
Width: 38.6cm
Depth: 30cm
Number of Pages: 15
Number of Parts: 136
DOWNLOAD  A4 ONLY

Build Order: Just follow the video :D .

Notes: Charizard was built by the amazing SuperRetroBro. Thanks for building!
Pdo files (without textures) are included. Use of said pdo files is highly recommended!

Pikachu (Charizard Costume) (Pokemon)

Pikachu is a short, chubby rodent Pokémon. It is covered in yellow fur with two horizontal brown stripes on its back. It has a small mouth, long, pointed ears with black tips, brown eyes, and two red circles on its cheeks. There are pouches inside its cheeks where it stores electricity. It has short forearms with five fingers on each paw, and its feet each have three toes. At the base of its lightning bolt-shaped tail is patch of brown fur at the base. A female will have a V-shaped notch at the end of its tail, which looks like the top of a heart. It is classified as a quadruped, but it has been known to stand and walk on its hind legs.

About the Model:

Height: 14cm / 30cm

Width: 13.5cm / 29cm

Depth: 10.4cm / 22.3cm

Number of Pages: 3 / 12

Number of Parts: 57

DOWNLOAD  14CM / DOWNLOAD 30CM

Build Order: Just follow the video :D .

Notes: Pdo files (without textures) are included.

Alolan Raichu (Pokemon)

In Alola, Raichu has lighter coloring and more rounded features. Its eyes are blue with yellow half-circles along the bottom. It has large yellow ears with an inner spiral toward the base and brown on the inside. These ears are thicker and less pointed than a standard Raichu's ear. In addition to its white belly, Alolan Raichu has white markings on its paws with bright yellow lines between its digits. The stripes on its back have also turned white, and there is a small, white circular marking on each heel. The lightning bolt-shaped tip of its tail has rounded edges. By collecting its psychic power in its tail, it is able to ride it like a surfboard and float in the air. While its cheek sacs are still used to store electricity, rubbing them releases a sweet aroma. This is also thought to be connected to its psychic abilities. Raichu's transformation in Alola into Alolan Raichu is a mystery, but the natives suppose that maybe it ate too many sweet, fluffy pancakes.

About the Model:

Height: 40cm

Width: 40.1cm

Depth: 19.9cm

Number of Pages: 11

Number of Parts: 64

DOWNLOAD  A4 ONLY

Build Order: Head, ears, arms, body, legs, tail.

Notes: Pdo files (without textures) are included.

Alolan Sandslash (Pokemon)

In the Alola region, Sandslash has an icy blue hide and quills covered in ice. These quills stand taller than a regular Sandslash's quills, and resemble icicles. This Pokémon uses its hide for camouflage in the snow, while leaving only its spines exposed. Its forepaws are larger than its counterpart, and its claws are longer, thinner, and hooked at the tips. Despite the weight of its ice-covered body, Alolan Sandslash is able to move swiftly by carving a path in the snow with its claws. This Pokémon tends to live in the deeper parts of snowy mountains, where climbing is forbidden. However, the sprays of snow it kicks up are popular shots for photographers.

About the Model:

Height: 35cm

Width: 30.4cm

Depth: 31cm

Number of Pages: 14

Number of Parts: 89

DOWNLOAD  A4 ONLY

Build Order: Face, top icicle, belly, quills above arms, arms, legs, remaining quills, tail.

Notes: Pdo files (without textures) are included.

Alolan Sandshrew (Pokemon)

In the Alola region, Sandshrew migrated to snowy mountains due to the volcanic activity near the desert areas. Its body is a light, icy blue and with a cream-colored belly and muzzle. Its head now resembles an igloo. Thicker plates form a dome around its head and its ears resemble an igloo's entrances. In adapting to this cold climate, its body became larger and heavier with a shell of ice covering its hide. The steel-like covering grants it extra defense, but it is unable to curl into a ball like its desert counterpart. Alolan Sandshrew's claws allow it to move without slipping on icy surfaces, but it slides on its stomach when it needs to move quickly.

About the Model:

Height: 25cm

Width: 20.6cm

Depth: 35.3cm

Number of Pages: 10

Number of Parts: 63

DOWNLOAD  A4 ONLY

Build Order: Muzzle, eyes, top of the head, ears, rest of the head, arms, belly, legs, back, tail.

Notes: Pdo files (without textures) are included.

Charmander (Pokemon)

Charmander is a bipedal, reptilian Pokémon with a primarily orange body. Its underside from the chest down and soles are cream-colored. It has two small fangs visible in its upper jaw and two smaller fangs in its lower jaw. Charmander has blue eyes. Its arms and legs are short with four fingers and three clawed toes. A fire burns at the tip of this Pokémon's slender tail, and has blazed there since Charmander's birth. The flame can be used as an indication of Charmander's health and mood, burning brightly when the Pokémon is strong, weakly when it is exhausted, wavering when it is happy, and blazing when it is enraged. It is said that Charmander dies if its flame goes out. However, if the Pokémon is healthy, the flame will continue to burn if gets a bit wet and is said to steam in the rain. Charmander can be found in hot, mountainous areas. However, it is found far more often in the ownership of Trainers. As shown in Pokémon Snap, Charmander exhibits pack behavior, calling others of its species if it finds food.

About the Model:

Height: 14cm

Width: 12.2cm

Depth: 11.6cm

Number of Pages: 3

Number of Parts: 40

DOWNLOAD  A4 ONLY

Build Order: Mouth, teeth, head, arms, torso, legs, tail, flame.

Notes: Charmander was built by Giden445. Thanks for building!

Two textureless .pdo files are included in the package! Pdo file for use in Pepakura VIEWER only. An Edge ID pdf file is included as well. There is an alternate coloration included in the package, which makes Charmander look like he does in the Pokepark Wii games.

Pikachu Libre (Pokemon)

Cosplay Pikachu is a variant female Pikachu that is able to be dressed up into five different costumes corresponding to each of the five Contest conditions (Coolness, Beauty, Cuteness, Cleverness, and Toughness), and learn exclusive moves which are linked to these costumes. Without a costume, she has the appearance of a female Pikachu with a black heart on the tip of her tail (fitting the heart-shaped notch all female Pikachu have on their tail).

About the Model:
Height: 20cm
Width: 18.3cm
Depth: 11.9cm
Number of Pages: 3
Number of Parts: 30
DOWNLOAD  A4 ONLY

Build Order: Just follow the video :D

Notes: Pikachu Libre was built by SuperRetroBro. Thanks for building!
Two textureless .pdo files are included in the package! Pdo file for use in Pepakura VIEWER only. An Edge ID pdf file is included as well.

Lugia

Lugia are very large creatures which bear a resemblance to something between a dragon, a plesiosaur, and a bird. They are primarily pale silver-white, but have blue undersides with slightly varying tones. They have a somewhat beak-like, ridged mouths, although they have teeth on their lower jaw. Their head has a point to the back, and Lugia’s eyes have pointed blue or black spikes on them. Lugia have long slender necks and their bodies are smooth and streamlined, with the exception of dark blue or black spike-like protrusions which run down the length of their back, and two smaller ones on the ends of their tails. It has large wings that resemble hands

 

About the model: 

Height: 30cm (A4) , 28cm (Letter) 

Width: 25.3cm (A4) , 23.6cm (Letter) 

Depth: 27cm (A4) , 25.2cm (Letter) 

Difficulty: Medium-Hard, 7/10 

Number of Pages: 5 (Including Shadow Parts) 

Number of Pieces: 102 (Including Shadow Parts) 

Download Lugia A4 / Letter 

 Instructions: Start at the spike on his head, build your way down at the other parts eyes the way you go, start the wings at the tips and build your way to the body, start the legs at the toes attach the tail spines wheter just before closing or after closing. Close at the tip of the tail. There are 2 ways to atach the back spines 1: make small cuts on the back and attach the spines while building 2: glue them on the back when you have finished building. Be careful with the teeth. 

 Notes: This was built by Dodoman75. Thanks for building. This craft is also available on the Paperplaza as the third and final opening model.