Elsa the Snow Queen [Frozen]

Elsa the Snow Queen of Arendelle is the deuteragonist of Disney's Academy Award-winning 2013 animated feature film Frozen. She is the older sister of Princess Anna and was next in line for Arendelle's throne, until her powers over ice and snow led her to become the famous Snow Queen, ruler of winter. She is voiced by Idina Menzel. Along with Anna, Elsa is set to become the 13th official member of the Disney Princess line-up. Elsa is loosely based on the title character of "The Snow Queen", a short story by Hans Christian Andersen, and to a much lesser extent, Kai from the same story. While the character from the original fairy tale was an antagonist, Elsa was rewritten as a protagonist.

About the Model (Capeless):
Height: 80cm
Width: 28.3cm
Depth: 22.8cm
Difficulty: 4/10
Number of Pages: 2
Number of Parts: 26
Download A4 ONLY

Build order: Start with the tip of the braid, then continue in this order. hair, face, neck, arms, torso, outer skirt, shoes and legs, inner skirt, and then connect the inner skirt to the outer by gluing it inside. At the end add the cape (optional; you can either use the pdo or make one yourself)

Notes: The package includes a cape pdo. You can build it if you want, or you can use tulle. 

Easter Special - Torchic

Torchic is a small, chick Pokémon with stubby, downy, yellow wings. Its body is covered with orange feathers. There is an orange and yellow crest on its head that resembles a flame. Its two thin legs and short beak of are a light brownish yellow, and the feet have three toes in front and one in the back. Somewhere in its belly, this Pokémon has a place where it keeps a flame. This internal flame causes Torchic to feel warm if hugged. When attacked, it will shoot fireballs of 1,800 degrees F at its foes, leaving them scorched black. It dislikes darkness, as it cannot see its surroundings. Torchic will follow its Trainer with unsteady steps. While Torchic is rarely found in the wild, it is known to inhabit grasslands. It evolves into Combusken starting at level 16, which evolves into Blaziken starting at level 36. 

About the Model:
Height: 13cm
Width: 6.4cm
Depth: 8.5cm
Difficulty: 4/10
Number of Pages: 2
Number of Parts: 26
Download A4 / Letter 

 

Build order: Just follow the numbers.

Happy Easter! :)

Bulbasaur

Bulbasaur is a dual-type Grass/Poison Pokémon. Bulbasaur is a small, quadruped Pokémon with green or bluish green skin and dark patches. Its thick legs each end with three sharp claws. Its eyes have red irises, while the sclera and pupils are white. Bulbasaur has a pair of small, pointed teeth visible when its mouth is open. It has a bulb on its back, grown from a seed planted there at birth. The bulb provides it with energy through photosynthesis as well as from the nutrient-rich seeds contained within. It evolves into Ivysaur starting at level 16, which evolves into Venusaur starting at level 32.

About the Model:
Height: 13cm
Width: 10.1cm
Depth: 15cm
Difficulty: 4/10
Number of Pages: 3
Number of Parts: 38
Download A4 / Letter

Build order: Mouth, teeth, head, front legs, body, hind legs, bulb. Close the model with the top of the bulb.

Vulpix

Vulpix is a small, quadruped, fox-like Pokémon. It has red-brown pelt, brown, pupil-less eyes, large, pointed ears with dark brown insides, and six orange tails with curled tips. The tails grow hot as evolution approaches for this Pokémon. Vulpix also has curled locks of orange fur with bangs on top of its head. At birth, Vulpix has only one white tail, which apparently splits and grows more beautiful and warmer as it grows older. Vulpix has a cream underbelly, and brown feet with lighter brown paw pads. It evolves into Ninetales when exposed to a Fire Stone.

About the Model:
Height: 15.6cm
Width: 15.7cm
Depth: 20cm
Difficulty: 6/10
Number of Pages: 4
Number of Parts: 55
Download A4 / Letter

Instructions: Follow the numbers. Build order: Hair, ears, head, front body, front legs, hind body, hind legs, tails (finish the model by gluing the tails seperately into the hole on its back)

Notes: the parts are squeezed together as much as possible to reduce the page number. There are no parts intersecting so don't worry about that.

Axew

Axew is a bipedal, grayish-green Pokémon with pale, straight tusks protruding from the sides of its mouth. These tusks can regenerate if broken, and will regrow if they fall out. This repeated regrowth strengthens and sharpens its tusks. The tusks serve numerous purposes, from making territorial gashes in trees to crushing Berries for eating. The back of its head is dark grayish-green with a tall, slightly curved horn. Large, dark grayish-green ovals surround its red eyes, and it has a short, rounded snout with large nostrils. A forest green collar marking encircles its neck. Axew's limbs and tail are short, with its forelimbs having three digits and its feet having two digits. As shown in the anime, Axew is skilled at climbing walls. It evolves into Fraxure starting at level 38, which evolves into Haxorus starting at level 48.

About the Model:
Height: 14cm
Width: 8.7cm
Depth: 12.7cm
Difficulty: 3/10
Number of Pages: 2
Number of Parts: 30
Download A4 / Letter

Instructions: Follow the numbers.  Build order: Horn, head, tusks, neck, upper body, arms, legs, lower body, tail.

Notes: A cutesy little dragon for you :) . Not very difficult, not very big, and a very cute outcome. I like this one. Nothing else to note.

Seven Wonders of the Ancient World Pt.7 - Pharos of Alexandria

The Lighthouse of Alexandria, sometimes called the Pharos of Alexandria, was a lofty tower built by the Ptolemaic Kingdom between 280 and 247 BC and between 393 and 450 ft (120 and 140 m) tall, it was one of the tallest man-made structures on Earth for many centuries, and was regarded as one of the Seven Wonders of the Ancient World. Badly damaged by three earthquakes between 956 and 1323, it then became an abandoned ruin. It was the third longest surviving ancient wonder (after the Mausoleum at Halicarnassus and the still extant Great Pyramid of Giza) until in 1480 the last of its remnant stones were used to build the Citadel of Qaitbay on the site. In 1994, French archaeologists discovered some remains of the lighthouse on the floor of Alexandria's Eastern Harbour.

About the Model:
Height: 15.6cm
Width: 16.5cm
Depth: 16.4cm
Difficulty: 4/10
Number of Pages: 2
Number of Parts: 13
Download A4 ONLY

Build order: Base, walls, bottom, middle, top pt.1, ligthbulb, top pt.2, roof, statue and add the boats if you want,

Notes: My favourite. I suggest not adding the statue, as it's too small for this scale.

Seven Wonders of the Ancient World Pt.6 - The Colossus of Rhodes

The Colossus of Rhodes was a statue of the Greek Titan Helios, erected in the city of Rhodes, on the Greek island of the same name, by Chares of Lindos in 280 BC. It is considered one of the Seven Wonders of the Ancient World. It was constructed to celebrate Rhodes' victory over the ruler of Cyprus, Antigonus I Monophthalmus, whose son unsuccessfully besieged Rhodes in 305 BC. Before its destruction in the earthquake of 226 BC, the Colossus of Rhodes stood over 30 meters (98.4 ft) high, making it one of the tallest statues of the ancient world.

About the Model:
Height: 24cm
Width: 16.3cm
Depth: 22.3cm
Difficulty: 4/10
Number of Pages: 3
Number of Parts: 28
Download A4 ONLY

Build order: Base, brick walls, head, body, arms. bowl (add flame if you want to), legs and add boats if you want.

Notes: Probably the ugliest.

Seven Wonders of the Ancient World Pt.5 - Mausoleum at Halicarnassus

The Mausoleum at Halicarnassus or Tomb of Mausolus was a tomb built between 353 and 350 BC at Halicarnassus (present Bodrum, Turkey) for Mausolus, a satrap in the Persian Empire, and Artemisia II of Caria, who was both his wife and his sister. The structure was designed by the Greek architects Satyros and Pythius of Priene.The Mausoleum was approximately 45 m (148 ft) in height, and the four sides were adorned with sculptural reliefs, each created by one of four Greek sculptors — Leochares, Bryaxis, Scopas of Paros and Timotheus. The finished structure of the mausoleum was considered to be such an aesthetic triumph that Antipater of Sidon identified it as one of his Seven Wonders of the Ancient World.

About the Model:
Height: 13cm
Width: 22.7cm
Depth: 16.4cm
Difficulty: 4/10
Number of Pages: 4
Number of Parts: 34
Download A4 ONLY

Build order: Base, main building, collumns, roof and finish with the statue.

Notes: Probably the nicest...

Seven Wonders of the Ancient World Pt.4 - The Statue of Zeus (Temple of Zeus)

The Statue of Zeus at Olympia was a giant seated figure, about 13 m (43 ft) tall, made by the Greek sculptor Phidias in circa 435 BC at the sanctuary of Olympia, Greece, and erected in the Temple of Zeus there. A sculpture of ivory plates and gold panels over a wooden framework, it represented the god Zeus sitting on an elaborate cedarwood throne ornamented with ebony, ivory, gold, and precious stones. It was regarded as one of the Seven Wonders of the Ancient World until its eventual loss and destruction during the fifth century AD.No copy of the statue has ever been found, and details of its form are known only from ancient Greek descriptions and representations on coins.

About the Model:
Height: 8.4cm
Width: 15cm
Depth: 24.3cm
Difficulty: 5/10
Number of Pages: 4
Number of Parts: 41
Download A4 ONLY

Build order: Base, temple floor, zeus, temple inner body, inner collumns, outer collumns and roof

Notes: You have double back walls, so you can glue one inside, so if you look at zeus you will see a colored wall.

Seven Wonders of the Ancient World Pt.3 - The Temple of Artemis

The Temple of Artemis (Greek: Ἀρτεμίσιον, or Artemision), also known less precisely as the Temple of Diana, was a Greek temple dedicated to the goddess Artemis and was one of the Seven Wonders of the Ancient World. It was located in Ephesus (near the modern town of Selçuk in present-day Turkey), and was completely rebuilt three times before its eventual destruction in 401.[1] Only foundations and sculptural fragments of the latest of the temples at the site remain.The first sanctuary (temenos) antedated the Ionic immigration by many years, and dates to the Bronze Age. Callimachus, in his Hymn to Artemis, attributed it to the Amazons. In the 7th century BC, the old temple was destroyed by a flood. Its reconstruction began around 550 BC, under the Cretan architect Chersiphron and his son Metagenes, at the expense of Croesus of Lydia: the project took 10 years to complete, only to be destroyed in an act of arson by Herostratus. It was later rebuilt.

About the Model:
Height: 6.4cm
Width: 25.5cm
Depth: 15cm
Difficulty: 7/10
Number of Pages: 4
Number of Parts: 89
Download A4 ONLY

Build order: Base, building, roof and collumns..

Notes: Probably the hardest one, due to the insane ammount of collumns.

Seven Wonders of the Ancient World Pt.2 - The Hanging Gardens of Babylon

The Hanging Gardens of Babylon were one of the Seven Wonders of the Ancient World, and the only one whose location has not been definitely established.Traditionally they were said to have been built in the ancient city of Babylon, near present-day Hillah, Babil province, in Iraq. The Babylonian priest Berossus, writing in about 290 BC and quoted later by Josephus, attributed the gardens to the Neo-Babylonian king Nebuchadnezzar II, who ruled between 605 and 562 BC. There are no extant Babylonian texts which mention the gardens, and no definitive archaeological evidence has been found in Babylon.One legend says that the Hanging Gardens of Babylon were created by Emperor Nebuchadnezzar II, the king of Babylon, for the Persian wife, Queen Amytis, because she missed the green hills and valleys of her homeland. Emperor Nebuchadnezzar II also built a grand palace that came to be known as 'The Marvel of the Mankind' or ('Al A'akheed vach altira'av chad') .

About the Model:
Height: 9.8cm
Width: 16.8cm
Depth: 22cm
Difficulty: 3/10
Number of Pages: 3
Number of Parts: 19 (12 optional)
Download A4 ONLY

Build order: Base, building, stairs, waterfalls, and add palms and bushes if you want.

Notes: The palms and bushes are optional

Seven Wonders of the Ancient World Pt.1 - The Great Pyramid of Giza

The Great Pyramid of Giza (also known as the Pyramid of Khufu or the Pyramid of Cheops) is the oldest and largest of the three pyramids in the Giza Necropolis bordering what is now El Giza, Egypt. It is the oldest of the Seven Wonders of the Ancient World, and the only one to remain largely intact. Egyptologists believe that the pyramid was built as a tomb for fourth dynasty Egyptian Pharaoh Khufu (Cheops in Greek) over a 10 to 20-year period concluding around 2560 BCE. Initially at 146.5 metres (481 feet), the Great Pyramid was the tallest man-made structure in the world for over 3,800 years. Originally, the Great Pyramid was covered by casing stones that formed a smooth outer surface; what is seen today is the underlying core structure. Some of the casing stones that once covered the structure can still be seen around the base. There have been varying scientific and alternative theories about the Great Pyramid's construction techniques. Most accepted construction hypotheses are based on the idea that it was built by moving huge stones from a quarry and dragging and lifting them into place.

About the Model:
Height: 8.3cm
Width: 15.7cm
Depth: 25cm
Difficulty: 1/10
Number of Pages: 2
Number of Parts: 3
Download A4 ONLY

Build order: Any, you can't possibly mess this up.

Notes: This is as easy as can be

Cinderella (Rags)

Cinderella is a fictional character and is the main protagonist in Disney's twelfth animated film, Cinderella (1950), and its two sequels. The Disney version of the character was based on the French version of the tale by Charles Perrault, written in 1634 in Histoires ou Contes du Temps Passé. She is the second in the Disney Princess line-up. Cinderella was voiced by the late Ilene Woods in the original film with Jennifer Hale taking over in the sequels.

About the Model:
Height: 60cm
Width: 37.5cm
Depth: 22.5cm
Difficulty: 6/10
Number of Pages: 16
Number of Parts: 106
Download A4 ONLY

 

Build order: Face, Hair, neck, arms, body, skirt, ribbon, apron, skirt (inner), legs and finish with the stand(optional)

 

Notes: This is the only picture i have, the model is ruined.

Princess Peach (Brawl)

 

Princess Peach is a character in Nintendo's Mario franchise. Originally created by Shigeru Miyamoto, Peach is the princess of the fictional Mushroom Kingdom, which is constantly under attack by Bowser. She often plays the damsel in distress role within the series and is the lead female. She is often portrayed as Mario's love interest and has appeared in nearly all the Mario games to date; with the most notable being in Super Princess Peach where she is the main protagonist.

About the Model:

 Height: 36.9cm

Width: 22.3cm

Depth: 18.5cm

Difficulty: 3/10 

Number of Parts: 85

 Number of Pages: 6

Download A4
A3 PDF ONLY

Nintendo Papercraft Contest Entry - Ness, Lucas & Mr. Saturn

Ness is the silent main protagonist of EarthBound. He greatly enjoys baseball; not only are most of his weapons various types of baseball bats, but he can also equip several baseball caps. In the EarthBound Player's Guide, he is said to wear a special baseball cap with his favorite team's logo on the front. Lucas is the Central Character of Mother 3. He is from Tazmily Village. He is the gentle twin of Claus. He usually uses sticks and baseball bats as his primary weapons, along with his powerful and strong signature PK Love power, which is the ability to pull the Seven Needles in order to wake the Dark Dragon which is sleeping underneath the Nowhere Islands. The Mr. Saturn
are a species in EarthBound and Mother 3 and serve as the unofficial mascot for the trilogy. They are strange, possibly extra-terrestrial life forms who reside in both Eagleland's Saturn Valley and the Nowhere Islands's Saturn Valley in EarthBound and Mother 3.

About the Models:

Ness and Lucas (Stand):

 Height: 60.2cm

Width: 44.1cm

Depth: 25.4cm

Difficulty: 6/10 (4/10 if you use the alternate hands)
Number of Parts: 151 (+ 8 alternate hands parts)
Number of Pages: 20

Mr. Saturn:

 Height: 8.9cm

Width: 7cm

Depth: 10cm

Difficulty: 2/10
Number of Parts: 13
Number of Pages: 1

DOWNLOAD AT NINTENDO PAPERCRAFT

Instructions : Just follow the numbers. The stand has no particular order, therefore it isn't numbered.

Notes. Ness and Lucas each have an alternate set of hands. Each hand is 2 parts, consists of 2d fingers and 3d palms. You can use these parts on your build if you think that the fingers would be hard to build.

Pinocchio

Pinocchio is the main protagonist from the 1940 film of the same name. He is a living puppet who must prove himself worthy to become a real boy, with the help of Jiminy Cricket as his conscience. Walt Disney and his crew used a marionette model and child actor Dickie Jones, who voiced Pinocchio in the movie, to animate the character.

About the Model:
Height: 50cm
Width: 25.6cm
Depth: 19cm
Difficulty: 7/10
Number of Parts: 103
Number of Pages: 14
Download Pinocchio A4 ONLY

Instructions : Start with the hat, after finishing the hat add both parts of the feather. Continue with the hair, face, nose, head, neck. Be sure to add support to the neck to prevent it from breaking. Build the collar and add some support in there too. Build the tie. Build the hands starting from the fingers and work your way up to the sleeves and add both hands to the collar before building the body ( the inner side of the jacket is kind of tough). Build the thighs. The final part is to build the Shoes and legs and attach them to the body in an angle you think will make your Pinocchio stable.

Notes: You can attach the legs to the body in an angle you want, to make the model more or less stable.

Eevee v2

Eevee is a mammalian creature with brown fur, a bushy tail that has a cream-colored tip, and a furry collar that is also cream-colored. Eevee has brown eyes, big ears, and pink paw pads. It has traits of rabbits, raccoons, foxes, dogs, and cats. Eevee is said to have an irregularly shaped genetic structure, enabling it to evolve into multiple Pokémon. . Eevee are quite rare in the wild. They sometimes live near cities and towns. It is possible for Eevee to live almost anywhere, and they may evolve to suit their surroundings. Eevee has an irregular genetic code and can sometimes evolve in accordance to its environment. Vaporeon when exposed to a Water Stone.Jolteon when exposed to a Thunderstone. Flareon when exposed to a Fire Stone. Espeon via happiness during the daytime (Generation II onward). Umbreon via happiness during the nighttime (Generation II onward). Leafeon when leveled up near a Moss Rock (Generation IV onward). Glaceon when leveled up near an Ice Rock (Generation IV onward)

About the Model:
Height: 19cm
Width: 26cm
Depth: 24.1cm
Difficulty: 5/10
Number of Parts: 58
Number of Pages: 6
Download Eevee A4 / Letter

Instructions : Just follow the numbers (Yes... I numbered the parts). Build order: hair, ears, head, fur, front legs, body, hind legs, tail.

Notes: N/A

Birthday Special - Life-Size Lara Croft

Lara Croft is an English archeologist and the main protagonist in the 2013 series reboot, Tomb Raider. Fresh from academy and in search of lost relics, a 21-year-old Lara Croft journeys to an island off the coast of Japan aboard the Endurance, a salvage vessel helmed by Captain Conrad Roth. 

About the Model :

Height: 190.9cm
Width: 76.9cm
Depth: 51.1cm

Number of Pages: 134

Number of Parts: 650

Difficulty: 8/10

Download A4 ONLY

 LINED PDO

LINELESS PDO
LINED PDF

LINELESS PDF

 

PDF FILES ARE 130MB EACH!!!

 

Build order : Head,hair,ponytail,neck,necklace,torso,legs,feet, USMC belt, quiver and arrows, holster and belt, rope, walkie talkie, pouches, arms, climbing axe, pistol and finish with the rope.

 

Notes: I suggest you make a lot of pillars for supporting her, i had 10 in each foot, one in each shoe, one large one inside the torso. The height is calculated with the bow on her back, so without the bow she is supposed to be about 20cm shorter, but my build came out a bit shorter and darker, so that's not the model itself, but the printer. Be careful when gluing the feet and legs together, and gluing the feet in a bad angle results in Lara being unstable. The hair is single sided so you can leave it white, or you could simply print brown or black to the back sides of the sheets, but that is a LOT of ink, so mine is single sided.

Have Fun Building :)

Starly

 

Starly is a bird with a brownish-gray colored body. The lower half of its wings as well as its head are black. Its face looks like it is wearing a white mask, with black eyes with white pupils as well as a thin orange beak with the tip of it painted black. On its chest is a white spot. Starly's feet are orange and also has three tail feathers: two black and one white in the middle.  It evolves into Staravia starting at level 14, which evolves into Staraptor starting at level 34. 

About the Model :

Height: 14.5cm
Width: 20.2cm
Depth: 10.9cm

Number of Pages: 4

Number of Parts:25

Difficulty: 3/10

Download A4 / Letter

 

Build order : Start by building the tuft on the top of the hair, continue down with the head and add the beak as soon as possible. Stop on the "spikes" on the neck. Start building the body from the tail, build the whole body, and then add the wings. Before gluing the head and body together, add the feet to the body.

 

Notes: A simple little craft, nothing interesting to note here.

Tomb Raider Legend - Lara Croft

Here is a little treasure hunt guys. I've hidden the pdo template link in one of my Tomb Raider Forum posts. Those who find it get to build it. Good luck!

The link will be taken down on monday

Hint : My favourite Tomb Raider :)

Tomb Raider Forums

UPDATE

Some people found it, Congratulations, but it's march 5th, so i am making it available for everyone, then i'm off to play the new TR.

About the model:
Height: 75cm
Width: 22.1
Depth: 39.7

Number of Pages: 17

Number of Parts: N/A (due to model reloading)

Difficulty: 7/10

Download A4 Only

Build order : Face, Head, Hair and Ponytail, neck, Pistols, arms, backpack, body, torn dress, belt, legs and finish by gluing the 3 main pieces together.

Notes: This thing is HUGE, but it is pretty stable. Also print 2 brown pages at the back of the last 2 here. You'll have to improvise on how to place the ponytail, but that shouldn't be hard for Tomb Raiders ;)  .